Handle Adjustment; Installation - Nuna pipa Bedienungsanleitung

Crotch belts
Identify crotch belt slot that will achieve a snug fit. Change crotch
belt slot if necessary.
1 Smaller babies use this position. Crotch belt is threaded
through rear slot and up through front slot as shown.
2 Medium sized babies use this position. Crotch belt is threaded
into rear slot as shown.
3 Larger babies use this position. Crotch belt is threaded through
front slot as shown.

Handle adjustment

1 The handle of the infant car seat can be adjusted to 3 positions.
Baby chair position.
Rocking position.
Position for car, hand or stroller transportation.
2 To adjust the handle positon, squeeze handle buttons on both
sides to release it.
3 Rotate handle until it clicks into any of the 3 positions.

Installation

without base
1 Place the infant car seat onto the vehicle seat where you wish
to put it. Pull the vehicle safety belt out and lock it into the
vehicle buckle, sliding the vehicle lap belt into the side guides of
the infant car seat.
2 Pull the diagonal belt behind the front end of the car seat and
then through the blue belt guide.
19
(12)
(14)
(15)
(16) -2
(16) -1
(17) -1
(18)
(16) -3
(19)
(13)
(17) -2