Button Function - AEG X79264MV10 Gebrauchsanleitung

www.aeg.com
4
4. CONTROLS

Button Function

A
B
C
D
E
F
5. LIGHTING
Warning: This appliance is fitted with a white LED
lamp classed as 1M according to EN 60825-1:
1994 + A1:2002 + A2:2001 standards; maximum
optical power emitted @439nm: 7µW. Do not
look directly at the light through optical devices
(binoculars, magnifying glasses...).
• For replacement contact technical support.
("To purchase contact technical support").
A B
Turns the suction motor on and off at speed one.
Press and hold the button for approximately 5 seconds, with all the
loads turned off (Motor and Lights), to turn the Remote Control On
and Off.
Decreases the working speed.
Increases the working speed.
Activates intensive speed from any other speed, including
motor off. This speed is set to operate for 5 minutes, after
which the system returns to the speed that was set before.
Suitable to deal with maximum levels of cooking fumes.
When the filters alarm is triggered, the alarm can be reset by
pressing and holding this button for approximately 3 seconds.
These indications are only visible when the motor is turned
off.
Delay function
Activates automatic switch-off with a 20' delay. Suitable to
complete elimination of residual odours. Can be activated
from any position, and is disabled by pressing the button or
turning the motor off.
Press and hold the button for approximately 5 seconds, with
all the loads turned off (Motor and Lights), to turn the Activa-
ted Charcoal Filter alarm On and Off.
Turns the lighting system on and off at maximum intensity.
C D E
Display
Displays the set speed
IR+Dot (2 flashes)–Alarm On.
IR+Dot (1 flash)–Alarm Off.
Displays the set speed
Displays the set speed
Displays HI and the time remaining
once every second.
F indicates the need to wash the
metal grease filters. The alarm is
triggered after the Hood has been in
operation for 100 working hours.
C indicates the need to change the
activated charcoal filters, and also
to wash the metal grease filters.
The alarm is triggered after the
Hood has been in operation for 200
working hours.
Displays the operating speed and
the dot at the bottom right flashes
alternately with the remaining time.
- C flashes twice - A.C. Filter alarm
Activated.
- C flashes once - A.C. Filter alarm
Deactivated
F