Installation Of The Circulating Pump - Spheros Thermo E 200 Einbauanweisungen

Installation of the circulating pump

5 Installation of the circulating pump
The circulating pump must be installed as shown in Figure 6, 9, 12 or 15.
Note the installation position!
NOTE:
The pump ports and connection lines from the water intake and water
outlet must be flush (no stress).
ATTENTION:
The heater should be equipped with SPHEROS circulating pumps.
5.1. U 4814 (Aquavent 5000) circulating pump
Fig. 6: U 4814 circulating pump
installation position
42
Fig. 7:
Δ
Br- Sw+
Fig. 8:
Hole pattern for the stand for U 4814 circulating pump
Delivery rate
(with water at 20°C)
Flow resistance
(with the pump stopped)
Delivery rate and flow resistance
U 4814 circulating pump
Thermo E 200/320