Revo Mondo Bedienungsanleitung Seite 13

Trouble-Shooting
Q. I hear a 'burbling' noise on some
stations.
A. If the signal strength is too low, a break-
up in reception can occur. This sound is
the result. Make sure that Mondo's wire
("Pig-Tail") antenna has been unraveled
and is straight. If the problem persists,
try moving Mondo to another location or
check that you are in an area where
reception of this station is possible.
Visit www.ukdigitalradio.com/coverage to
check DAB coverage in your locality.
Q. I get a '?' before some stations in my
station list, and don't seem to be able to
select them.
A. '?' before a station name means that it is
either inactive or unavailable. This can
be because they are not currently
broadcasting, you are outside their
broadcast area or you have simply lost
reception. To remove inactive or
unavailable stations press the MENU
button and go to the 'Prune Stations'
option (available through the Station
Order menu).
Q. I get a 'No stations available' message?
A. Make sure that your antenna is fully
extended and vertical. Check the signal
strength and move Mondo to another
location if necessary.
Q. I get a 'clock not set' message.
A. Mondo needs to be able to pick-up a
DAB signal to set its clock, since the
time is taken from a radio station
broadcast. Try turning Mondo on and
pressing the SCAN button. If Mondo
can find a DAB station, it can then set
its clock.
English
13