Plant Freon R404A; Programmed Maintenance Warning - Icematic E serie Serviceanleitung

8.5 FEATURES OF THE GAS REFRIGERATOR PLANT
FREON R134a
• medium and maximum series"E"blade machines absorption
at room temperature of 32°C.
• Condensing pressure and evaporator temperature cycle start
and end at room temperature of 32°C.
E21 134 a
E25 134 a
E35 134 a
E60 r134a
E75 r134a
E90 r134a
* Expressed in water litres per hour at water temperature of
15°C and room temperature of 21°C

8.6 PROGRAMMED MAINTENANCE WARNING

• the programmed maintenance time is set at 0 hour by the
manufacturer.
• In order to modify this time and/or reset the maintenance
recall function; proceed with dip-switch set-up, as shown in
the attached table.
oFF
1
on
oFF
2
on
oFF
3
on
oFF
4
on
* In case of programmed maintenance, to reset and to restore
the programming to the initial value it's necessary to press
the RESET button for at least 5 seconds.
10/2011
2 a 1,8 a 11,5
1,6 a 1,4 a 11
2,7 a 2,1 a 14
4,2 a 3,4 a 14,7
4,6 a 3,8 a 14,6
4,7 a 4,2 a 14,9
DIP
1
71503816/0 - rEV.02
-3,3 9
-2 9
-2 10
-2 11,3
-2 11,4
-2 10,8
2
Interval of maintenance to 0 hour
Interval of maintenance to 2000 hours
Interval of maintenance to 6000 hours
Interval of maintenance to 3500 hours
-17 7,5 15/19 gr
-13 5,8 15/179 gr
-15 8,6 20/17 gr
-15 12,7 35/17 gr
-13 13,3 60/17 gr
-15 14,4 60/17 gr
notE
6
2,8
4,7
7,5
9,4
12,5
17