Using Blackmagic Converters Setup; Installing Blackmagic Converters Setup - Blackmagic Design ATEM Camera Converter Handbuch

Using Blackmagic Converters Setup

Blackmagic Converters Setup is used to configure settings and update the internal software in
your ATEM Camera Converter, ATEM Talkback Converter 4K or ATEM Studio Converter.

Installing Blackmagic Converters Setup

The Blackmagic Converters utility software can be used to update your converter to new video
standards, add compatibility with new hardware or adjust video and audio levels.
Installation on Mac OS X
1 Download the Blackmagic Converters Setup software from www.blackmagicdesign.com
2
Unzip the downloaded file and open the resulting disk image to reveal its contents.
3 Double click the installer and follow the prompts to complete the installation.
4 When the installation has finished, it will prompt you to restart your computer.
Click 'restart' to complete the installation. Blackmagic Converters Setup is
now installed.
Installation on Windows
1 Download Blackmagic Converters Setup from www.blackmagicdesign.com
2 Unzip the downloaded file. You should see a Blackmagic Converters Setup folder
containing this PDF manual and the Blackmagic Converters Setup installer.
3 Double click the installer and follow the prompts to complete the installation.
4 When the installation has finished, it will prompt you to restart your computer.
Click 'restart' to complete the installation.
Once the computer has restarted, Blackmagic Converters Setup will be ready to use.
Using Blackmagic Converters Setup 19