ASROCK ALiveNF7G-FullHD R1.0 Schnellinstallationsanleitung Seite 20

2.6 HDMI Audio F 2.6 HDMI Audio F 2.6 HDMI Audio Function Operation Guide
2.6 HDMI Audio F 2.6 HDMI Audio F
The DVI-D port for the chipset adopted on this motherboard can support DVI/HDCP and
HDMI format signal. You may use the DVI to HDMI adapter to convert the DVI-D port to
HDMI interface. Please follow below steps to enable HDMI audio function according to
the OS you install.
1. DVI to HDMI adapter is not bundled with this motherboard, please
refer to the adapter vendor for further information.
2. If you install the DVI-D monitor instead of the HDMI monitor on this
motherboard and enable HDMI audio function, the film you play
may pause sometimes.
For Windows ® XP / XP 64-bit OS
Step 1: Set up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set the option "OnBoard HDMI HD Audio" to [Auto].
Step 2: Install HDMI audio driver to your system.
Install "Onboard HDMI HD Audio Driver" from ASRock Support CD to your system.
Step 3: Reboot your system.
After you reboot the system, the HDMI audio function is available.
After HDMI audio driver is installed, the OS default will output the
audio signal through HDMI audio. Therefore, the onboard audio jack
will not function.
For Windows ® Vista TM
Step 1: Set up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set the option "OnBoard HDMI HD Audio" to [Auto].
Step 2: Enter Windows
A. Click "Start" button, select "Settings", and then click "Control Panel".
B. Click "Hardware and Sound", and click "Sound".
C. Change the default setting "Speaker" to "Digital Output Device (HDMI)".
D. Click "OK" to finish the setting.
Step 3: Reboot your system.
After you reboot the system, the HDMI audio function is available.
2 0 2 0 2 0
2 0 2 0
ASRock
unction Operation Guide unction Operation Guide unction Operation Guide
unction Operation Guide
Advanced screen
/ Vista TM 64-bit OS
Advanced screen
® to set up your system manually.
ALiveNF7G-FullHD Motherboard
Chipset Configuration.
Chipset Configuration.