Putting The Blood-Pressure Monitor Into Operation; Inserting The Batteries - Marque Verte Digitensio poignet Gebrauchsanweisung

4. Putting the blood-pressure monitor into operation

4.1. Inserting the batteries

After you have unpacked your device, first insert the batteries. (see illustration).
a) Remove cover as illustrated
b) Insert the batteries (2 x size AAA 1.5V), thereby observing the indicated polarity.
c) If the battery warning appears in the display,
replaced by new ones.
Attention!
replaced.
AAA» Long-Life or Alkaline 1.5V Batteries. The use of 1.2V Accumulators is not
recommended.
from the device.
Functional check: Press and hold the button
functioning correctly all segments appear.
the batteries are empty and must be
Size: 17mm * 60mm
to test all the display elements. When
32