Salter MiBody Bedienungsanleitung

IMPÉDAN CEMÈTRE
PESAPERSONE RILEVA-GRASSO
LICHAAMSANALYSE WEEGSCHAAL
KROPSANALYSEVÆGT
VÜCUT ANALİZ TARTISI
GB
MiBODY Salter MiBody is a range of connected devices to make weight and health
management easier. Measurements are sent wireless to your mobile device and can
be viewed using the free to download MiBody App. Trends can be tracked overtime
and the measurements explained with healthy/recommended ranges. The results are
stored on your personal mobile device and are private unless you choose to share
your achievements.
MiBody should be used in addition with and not as a substitute to professional
medical guidance. If you are concerned about any aspect of your health please seek
professional medical guidance.
HOW DOES THIS SALTER SCALE WORK? This Salter scale uses BIA (Bio Impedance
Analysis) technology which passes a tiny electrical impulse through the body to
determine fat from lean tissue, the electrical impulse cannot be felt and is perfectly
safe. Contact with the body is made via stainless steel pads on the platform of the
scale.
This method simultaneously calculates your personal weight, body fat, total body
water, BMI and muscle mass, giving you a more accurate reading of your overall
health and fitness. This scale stores the personal data of up to 4 users. As well as
being an analyser scale, this scale can be used as a conventional scale.
PREPARING YOUR SCALE 1. Open the battery compartment on the scale underside.
2. Remove isolating tab from beneath the battery (if fitted) or insert batteries
observing the polarity signs (+ and -) inside the battery compartment. 3. Close
the battery compartment. 4. Select kg, st or lb weight mode by the switch on the
underside of the scale. 5. For use on carpet remove the non-slip pads from the
scales feet and attach enclosed carpet feet. 6. Position scale on a firm flat surface.
MiBODY APP Before using your device for the first time: 1. Download and install
the Salter MiBody App from the App store. Use keyword search terms "Salter" or
"MiBody". 2. Turn Bluetooth "On" in the "Settings" menu of your mobile device.
3. Open the MiBody App and follow the on screen instructions to set up your user
account.
PAIRING DEVICES
1. Turn Bluetooth "On" in the "Settings" menu of your mobile device.
2. Open the MiBody App.
3. Press the button.
4. Press "Add Device".
E
BODY ANALYSER SCALE
Instructions and Guarantee
Quick Start Guide
KÖRPER-ANALYSE-WAAGE
BALANÇA DE ANÁLISE CORPORAL
KEHON KOOSTUMUKSEN ANALYYSIVAAKA
ELEKTROMOS KONYHAMÉRLEG
ΖΥΓΑΡΙΑ ΜΕ ΑΝΑΛΥΤΗ ΣΩΜΑΤΟΣ
WAGA BODY ANALYSER
BÁSCULA ANALIZADORA DEL CUERPO
KROPPSANALYSEVEKT
VÁHA PRO ANALÝZU TĚLA
ВЕСЫ-АНАЛИЗАТОР
OSOBNÁ VÁHA S ANALYZÁTOROM
5. Turn on the scale.
6. Press and hold the "UNIT" button on the base of the scale until is displayed on
the screen.
7. On your mobile device, touch the scale icon to connect with the scale. Select the
user number you wish to pair. Touch the Done button to finish.
8. If pairing is successful will be displayed.
9. If pairing is unsuccessful will be displayed.
10. The scale will automatically switch off.
11. Repeat procedure for each user and each mobile device.
Note: Each user number can only be paired with one mobile device. Results will be
sent to the paired device only.
INITIALISING YOUR SCALE 1. Press the platform centre and remove your foot.
2. '0.0' will be displayed. 3. The scale will switch off and is now ready for use.
This initialisation process must be repeated if the scale is moved.
At all other times step straight on the scale.
WEIGHT READING ONLY This scale features our convenient step-on operation. Once
initialised the scale can be operated by simply stepping straight on the platform – no
more waiting! 1. Step on and stand very still while the scale computes your weight.
2. Your weight is displayed. 3. Step off. Your weight will be displayed for a few
seconds. 4. The scale will switch off.
PERSONAL DATA ENTRY
1. Press the platform centre and remove your foot.
2. Press the button.
3. While the user number is flashing, select a user number by pressing the or
buttons. Press the button to confirm your selection.
4. The weight mode display will flash.
Press or button until the correct symbol is flashing, then press the
5. The male or female symbol will flash. Press or to select male/female/male
athlete/female athlete, then press the
Athlete Mode:
An athlete is defined as a person who is involved in intense physical activity
of approximately 12 hours per week and who has a resting heart rate of
approximately 60 beats per minute or less.
6. The height display will flash.
Press or as necessary to set your height, then press the
7. The age display will flash.
KROPPSANALYSVÅG
button.
button.
button.
9159