Cleaning And Maintenance - Lopital Elexo XXL Benutzeranleitung

5. Cleaning and maintenance

The Elexo XXL must be cleaned after every use, with water and regular household
cleaning agents. Remove excess soap residues. PUR integrated foam components with
IMC coating should be rubbed clean and disinfected. Do not use any abrasive or other
aggressive cleaning products (e.g. chlorine bleach). Practical experience has shown that
regular household cleaning agents with limited alcohol content (max. 5%) are most
suitable for this purpose. The product Neoquat combi
® is recommended for disinfection
purposes (on the basis of long-term testing). If necessary, the PUR components can be
cleaned with a solution of 70% ethanol or propanol.
You must ensure that both the disinfecting and cleaning processes involve the
components being rubbed and not just submerged. The time the products must be left
on the components has a significant impact upon the lifespan of the PUR components.
As a result of the material properties of PUR, contact with sharp objects must be
avoided. This could lead to damage or tears in the material. Finally, we would like
to point out that non-critical parts of the PUR components must also be cleaned and
decontaminated.
Check the wheels regularly for hairs, dust and soap residues and remove when
necessary. Maintenance and repairs to the Elexo XXL may only be carried out by
authorised personnel.
38 | Instructions for use | Elexo XXL Shower-toilet chair