Installation - AEG HK614000H Benutzerinformation

MOD.
PROD.NO.
SER.NO
DATA
Stick it on Guarantee Card and send
1
this part
Stick it on Guarantee Card and keep
2
this part

8. INSTALLATION

WARNING!
Refer to the Safety chapters.
8.1 Installation
WARNING!
Read and follow the instructions
carefully. There is a risk of injury
or damage to the appliance.
• Make sure that there is no damage to
the appliance from the transportation.
Do not connect a damaged appliance.
Speak to the supplier if necessary.
• Install built-in appliances only after
you assemble the appliance into cor-
rect built-in units and work surfaces.
Make sure that built-in units and surfa-
ces obey the standards.
• Obey all orders and standards in force
in the country where you use the ap-
pliance (safety standards, recycling
standards, electrical safety standards
etc.)
WARNING!
Risk of injury from electrical cur-
rent.
1 2
MOD.
PROD.NO.
SER.NO
DATA
MODEL MODEL
MOD.
PROD.NO.
0049 SER.NO.
03 IT
MADE IN ITALY
Stick it on instruction booklet
3
• The electrical mains terminal is live.
• Make electrical mains terminal free of
voltage.
• If the fixing bracket is near to the ter-
minal block, do not let the connection
cable come in contact with the edge
of the bracket.
8.2 Electrical connection
• Make sure that the rated voltage and
type of power on the rating plate
agree with the voltage and the power
of the local power supply.
• Always use a correctly installed shock-
proof socket.
• Make sure that there is an access to
the mains plug after installation.
• Do not pull the mains cable to discon-
nect the appliance. Always pull the
mains plug.
• There is a risk of fire when the appli-
ance is in connection with an exten-
sion cable, an adapter or a multiple
connection. Make sure that the
ground connection agrees with the
standards and regulations.
ENGLISH
3
TYPE
230V-50Hz
IP20
19