Einstellpunkte Für 3-Wege-Übergang - Kenwood KMM-BT305 Bedienungsanleitung

AUDIOEINSTELLUNGEN
[SUBWOOFER [SW LPF FRQ]
LPF] *1*2
[SW LPF SLOPE] [–6DB]
[SW LPF PHASE] [REVERSE]
[SW LPF GAIN]
Einstellpunkte für 3-Wege-Übergang
[SPEAKER SIZE]
[TWEETER] [SMALL] / [MIDDLE]
[MID RANGE] [8CM] / [10CM] / [12CM]
[5×7] / [6×8] / [6×9]
[WOOFER] [16CM] [20CM]
*2 /
angeschlossen)
[X ' OVER]
[TWEETER] [HPF FRQ]
[SLOPE]
[PHASE]
[GAIN]
[30HZ] [40HZ] [50HZ] [60HZ] [70HZ]
/ / / /
[90HZ] / [100HZ] / [120HZ] / [150HZ] / [180HZ]
[220HZ] / [250HZ] / [THROUGH]
[–12DB] –18DB] [–24DB]
/ /[ /
[NORMAL]
(180°)/ (0°)
[–8] [0]
bis
/ [LARGE]
/ [13CM] / [16CM] / [17CM] / [18CM]
[25CM] [30CM] [38CM OVER] [NONE]
/ / / /
[1KHZ] [1.6KHZ] [2.5KHZ] [4KHZ]
/ / / /
[6.3KHZ] [8KHZ] [10KHZ] [12.5KHZ]
/ / /
[–6DB] [–12DB]
/
[REVERSE] [NORMAL]
(180°)/ (0°)
[–8] bis [0]
[80HZ] [MID RANGE]
/ /
/
[WOOFER] *2
/ [4×6] /
(nicht
*1 : Nur wählbar, wenn
[5KHZ]
/
*2 Nur wählbar, wenn
[HPF FRQ] [30HZ] [40HZ] [50HZ]
/ /
[90HZ] / [100HZ] / [120HZ]
[220HZ] / [250HZ]
[HPF SLOPE] [–6DB] [–12DB]
/
[LPF FRQ] [1KHZ] [1.6KHZ]
/ /
[6.3KHZ] [8KHZ]
/ /
[LPF SLOPE] [–6DB] [–12DB]
/
[PHASE] [REVERSE]
(180°)/
[GAIN] [–8] bis [0]
[LPF FRQ] [30HZ] / [40HZ] / [50HZ]
[90HZ] / [100HZ] / [120HZ]
[220HZ] / [250HZ]
[SLOPE] [–6DB] / [–12DB]
[PHASE] [REVERSE]
(180°)/
[GAIN] [–8] [0]
bis
[SWITCH PREOUT] auf [SUB-W]
[SUBWOOFER SET] auf [ON] gestellt ist. (Seite 19)
[60HZ] [70HZ] [80HZ]
/ / / /
/ [150HZ] / [180HZ] /
/ [THROUGH]
[2.5KHZ] [4KHZ] [5KHZ]
/ / /
[10KHZ] [12.5KHZ] [THROUGH]
/ /
[NORMAL]
(0°)
/ [60HZ] / [70HZ] / [80HZ] /
/ [150HZ] / [180HZ] /
/ [THROUGH]
[NORMAL]
(0°)
gestellt ist. (Seite 4)
21
DEUTSCH