WIKA DIH50 Betriebsanleitung Seite 20

8. Menu guidance
8.2.1 Submenu "Alarm"
EN
Function
On/off
Activating or deactivating the alarm function;
if a value exceeds or falls below a set alarm limit, the display shows the warning
symbol and the measured value starts flashing.
Setting range:
- OFF
- ON
Low alarm
Setting the value which releases the alarm function when this value is not
reached.
Setting range:
Start value of the indication range up to the set value of the high alarm
High alarm
Setting the value upon exceeding of which the alarm function is released.
Setting range:
Set value of the low alarm up to the end value of the indication range
8.2.2 Submenu "Min/Max memory"
Function
Delete min/max
Function for deleting the maximal value memory
Pressing the SELECT key twice deletes the maximum value memory.
Min/max on/off
Activation of the min./max. display;
If the min./max. display is switched on, the display switches cyclically between
the current measured value (display time 5 s), the minimum value and the
maximum value (display time 2 s).
For the display of the maximum values, the unit on the display is replaced by
min. or max.
Setting range:
- OFF
- ON
20 WIKA operating instructions models DIH50, DIH52
Factory setting
OFF
4,000
20,000
Factory setting
dEL
OFF