Transport And Storage - Unitest Hexagon 55 Bedienungsanleitung

2.0

Transport and Storage

Please keep the original packaging for later transport, e.g. for calibration. Any
transport damage due to faulty packaging will be excluded from warranty
claims.
In order to avoid instrument damage, it is advised to remove accumulators
when not using the instrument over a certain time period. However, should
the instrument be contaminated by leaking battery cells, you are kindly
requested to return it to the factory for cleaning and inspection.
Instruments must be stored in dry and closed areas. In the case of an instru-
ment being transported in extreme temperatures, a recovery time of mini-
mum 2 hours is required prior to instrument operation.
3.0 Safety Rerferences
The respective accident prevention regulations established by the pro-
fessional associations for electrical systems and equipment must be
strictly met at all times.
The respective accident prevention regulations established by the pro-
fessional associations are to be strictly enforced at all times regarding
body protection in the event of danger of burns.
In order to avoid electrical shock, the valid safety and VDE regulations
regarding excessive contact voltages must receive utmost attention,
when working with voltages exceeding 120V (60V) DC or 50V (25V)rms
AC. The values in brackets are valid for limited ranges (as for example
medicine and agriculture).
Measurements in dangerous proximity of electrical systems are only to
be carried out in compliance with the instructions of a responsible elec-
tronics technician, and never alone.
29