Control Panel; Installing The Appliance - Gaggenau RW 262 Gebrauchsanleitung

Control panel

1 Main On/Off switch
Switches the whole appliance on and off.
2 Temperature selection buttons
The selected temperature is set with the Æ and Ç
buttons.
First use the selector switches for the lower chilling
zone 4 or the upper chilling zone 5 to select the chilling
zone which is to be set.
3 Temperature display
Set temperature is displayed:
Upper temperature display:
Temperature display in the upper cooling zone
Lower temperature display:
Temperature display in the lower temperature zone
4 Lower refrigeration zone:
Press button - †"£ ƒ is indicated on the display.
Note:
The refrigerator compartment temperature can be set
from +5 °C to +22 °C.
The lower area of the cabinet cannot be set warmer than
the upper area.
5 Upper refrigeration zone:
Press button - †"£ ‚ is indicated on the display.
Note:
The refrigerator compartment temperature can be set
from +8 °C to +22 °C.
The upper area of the refrigerator cannot be set colder
than the lower area.
6 Light switch

Installing the appliance

Install the appliance in a dry, well ventilated room. The
installation location should neither be exposed to direct
sunlight nor near a heat source, e.g. a cooker, radiator, etc. If
installation next to a heat source is unavoidable, use
a suitable insulating plate or observe the following minimum
distances to a heat source:
3 cm to electric or gas cookers.
30 cm to an oil or solid‐fuel cooker.
21