General Description; Technical Data; Operation - Eldom CW2 Bedienungsanleitung

R
3
6
7
Pic. 01

OPERATION

Before first use, clean and dry all the parts of the juicer (see chapter: CLEANING
AND MAINTENANCE). Then:
- carefully assemble all the parts:
- place the container (3) on the base (2) and twist it clockwise
- combine the cone (7) with the pulp stainer and place them on
the spindle (4)
- unwind the cable (1) coiled around the base
- place the juicer on a flat, hard, stable surface
- wash the fruit and cut them in halves
- choose cone size appropriate to the size of the fruit
The small cone (7) together with the pulp stainer (6) should be placed directly
on the spindle.
The large cone (8) should be placed directly on the smaller cone (7)
plug the juicer to an electric outlet.
The juicer will start automatically when the fruit is pressed against the cone
the fruit should be pressed sensitively in a vertical direction and. For better
results, it is recommended to press harder or softer.
The juicer has a mechanism for switching the rotation of the cone automatically
when done, unplug the juicer from the outlet.
If the pulp stainer or the juice container is full, stop the juicer, unplug it and clean
the pulp stainer or pour the juice to a separate container.
Please, observe the maximum continuous operation time. Exceeding the
operation time or failure to observe the operation intervals may result in
permanent damage to the motor.
4
5
1
2
8
USER MANUAL
CITRUS JUICER CW2

GENERAL DESCRIPTION

1. Power cable
2. Base
3. Container
4. Spindle
5. Handle
6. Pulp stainer
7. Small cone
8. Large cone
9. Cover

TECHNICAL DATA

- power: 40 W
9
- volume: 1 l
- voltage: 230 V ~ 50Hz
- maximum continuous
operation time: 15 s
- interval between operation
cycles: 15 s (no more than 10 cycles)
4