Nibe EME 20 Installateurhandbuch Seite 8

Important information
NOTE
This symbol indicates danger to person or ma-
chine .
Caution
This symbol indicates important information
about what you should observe when maintain-
ing your installation.
TIP
This symbol indicates tips on how to facilitate
using the product.
General
EME 20 is used to enable communication and control
between the inverter for solar cells and heat pump/in-
door module/control module.
Caution
The heat pump's/indoor module's/control
module's software must be the latest recom-
mended version. If not, download the latest
recommended software version for your
product to a USB memory device from ht-
tp://www.nibeuplink.com and install.
Compatible products
This accessory is suitable for following products:
■
F1245
■
F1255
■
F1345 without 2.0
■
F1345 with 2.0
■
F370
■
F470
■
F730
■
F750
Contents
2 x Mounting screws
8
English
■
VVM 225
■
VVM 310
■
VVM 320
■
VVM 325
■
VVM 500
■
SMO 20
■
SMO 40
Component positions
Electrical components
X1 Terminal block, power supply
AA23 Communication board
AA23-S2 DIP switch
X1
AA23
AA23-S2
EME 20 | GB