Troubleshooting; Possible Cause - Klarstein 10029816 Bedienungsanleitung

Problem
• Plug not put in
No cooling • Low voltage
• Fuse broken
• The refrigerator is placed too near
• Bad ventilation;
Not cold enough
• Fans don't work;
temperature inside.
• The door is not closed tightly or
Peculiar smell inside • Check whether there is any sour in-
refrigerator
• Set temperature higher than inner
Inside light flash
• The automatic defrost function start
• Too much humidity or too low tem-
Frost on the cold sink.

Troubleshooting

Possible cause

heat source;
opened too frequently or for too
long time
side.
temperature;
to work.
perature inside the case.
Solutions
• Put in the plug
• Ensure normal voltage
• Change fuse
• Keep the refrigerator away from
sunshine or other heat source;
• Place the refrigerator in the area
with good ventilation and keep
things away from the fans;
• Check whether the plug is connect-
ed or change the fan;
• Close the door tightly and don't
open the door too frequently or for
too long time.
• Wrap the source or take it out.
• Adjust the adjustor
• Normal function. No repair needed
• Output the plug, stop the power,
and defrost by hand, Connect
power again when the ice thaws.
12