Technical Data - Beper BP.653 Betriebsanleitung

EN
Blender Use instructions
Product description Fig.1
1. Speed control knob
2. Slow and adjustable speed button (on / off)
3. Turbo speed button (turbo)
4. Main unit
5. Detachable blades unit
Operation:
• Remove the product from the packaging and check that it is intact and that all components are inside.
• Carefully wash the product, as described in the appropriate "cleaning" section.
• Connect the blades unit to the main unit, paying attention to aligning the triangle symbol marked on the blades
unit with the padlock open marked on the main unit and turning in the direction of the padlock close. Proceed in
the reverse direction to detach the blades unit.
• Insert the plug in the socket, making sure that the wire is not dimmed and / or close to heat sources.
• Insert the blades unit into the container with the food previously cut and which is recommended to have added
liquid (water, milk, broth). Do not operate the appliance with solid foods only.
• Use a container large enough so that no sketches come out.
• Activate the product by pressing the desired button.
Turbo button = the product will start working at maximum speed. You will not be able to adjust the speed with the
knob placed over the main unit.
Slow & Adjustable Speed Button = The product will start working at a slower speed that you can adjust with the
knob placed on the top of the main unit.
• Disconnect the appliance from the power outlet after use.
• Disconnect the blades unit from the main unit.
• Wash the appliance as indicated in the "Cleaning" section.
CLEANING:
Always switch off the appliance and disconnect the power cord from the electrical outlet.
Clean the main unit with a damp cloth, do not immerse it in water or other liquids and do not wash it in the di-
shwasher or under the tap.
Wash the blades unit with warm water and detergent.
PAY GREAT ATTENTION WHEN WASHING STEEL BLADES, THEY ARE SHARP AND CAN HURT .
Do not use metal brush or other abrasives on plastic or metal parts.
Do not try to sharpen the blades.
Before storing the appliance, make sure it is completely dry.

TECHNICAL DATA:

Power: 600W
Power supply: 220-240V - 50 / 60Hz
For any improvement reasons, Beper reserves the right to modify or improve the product without any
notice.
9