Aeroneb Solo Bedienungsanleitung Seite 194

recommended separation distances between portable and
mobile rF communication equipment and the aeroneb solo
The Aeroneb Solo nebulizer system is intended for use in the
electromagnetic environment in which radiated RF disturbances
are controlled. The customer or the user of the Aeroneb Solo
can help prevent electromagnetic interference by maintaining a
minimum distance between port and mobile RF communications
equipment (transmitters) and the Aeroneb Solo nebulizer system as
recommended below, according to the maximum output power of
the communications equipment.
rated separation distance according to frequency
maximum
output power
of transmitter
150 khz to
W
d = [1.17] √P
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above,
the recommended separation distance d in metres (m) can be
estimated using the equation applicable to the frequency of the
transmitter, where P is the maximum output power rating of the
transmitter in watts (w) according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the
higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations.
Electromagnetic propagation is affected by absorption and
reflection from structures, objects and people.
of transmitter
80 Mhz to
80 Mhz 800 Mhz
d = [1.17] √P
0.12 0.12
0.37 0.37
1.17 1.17
3.70 3.70
11.70 11.70
Aeroneb Solo System Instruction Manual
®
m
800 Mhz to
2.5 Ghz
d = [2.33] √P
0.23
0.75
2.33
7.36
23.30