Technical Data; Terminal Assignment - elobau 471 M41 H31 Originalbetriebsanleitung

1

Technical data

1.1 Terminal assignment

Up to 4 sensors can be connected to the control unit.
Terminal Assignment
1, 25 24 V DC operating voltage
6, 7, 8 Sensor input 1 (S1), contact maker (to be bridged, if not needed)
14, 15, 16 Sensor input 2 (S2), contact maker (to be bridged, if not needed)
2, 5 External contactor 1 and 2 (to be bridged, if not needed)
22, 23, 24 Sensor input 3 (S3), contact maker (to be bridged, if not needed)
13, 21, 30, Input sensor 4 (S4), two contact makers, contact maker/breaker
31, 32 or emergency off with cross short detection (to be bridged if not
needed)
2, 29 External contactor 3 and 4 (to be bridged, if not needed)
26 Control output ready
9, 17 Safety output 1 (SA1), contact maker, floating
10, 18 Safety output 2 (SA2), contact maker, floating
3 Control output 1 (A1), contakt maker
4 Control output 2 (A2), contakt maker
11, 19 Safety output 3 (SA3), contact maker, floating
12, 20 Safety output 4 (SA4), contact maker, floating
27 Control output 3 (A3), contakt maker
28 Control output 4 (A4), contakt maker
900565 / 04.04.2016
GB
19