Installing Windows - ASROCK Z68 Pro3-M Handbuch

2.9 Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive fi rst. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom side
to install those required drivers. Therefore, the drivers you install can work properly.
2.10

Installing Windows

64-bit / XP / XP 64-bit With RAID Functions
If you want to install Windows
bit on your SATA / SATAII / SATA3 HDDs with RAID functions, please refer to the
document at the following path in the Support CD for detailed procedures:
..\ RAID Installation Guide
2.11 Installing Windows
/ XP 64-bit Without RAID Functions
If you want to install Windows
bit OS on your SATA / SATAII / SATA3 HDDs without RAID functions, please follow
below procedures according to the OS you install.
2.11.1 Installing Windows
Functions
If you want to install Windows
HDDs without RAID functions, please follow below steps.
Using SATA / SATAII / SATA3 HDDs without NCQ function
STEP 1: Set up UEFI.
A. Enter UEFI SETUP UTILITY
B. Set the option "SATA Mode" to [IDE].
®
STEP 2: Install Windows
ASRock Z68 Pro3-M Motherboard
®
7 / 7 64-bit / Vista
® TM
7 / 7 64-bit / Vista / Vista
®
7 / 7 64-bit / Vista
® TM
7 / 7 64-bit / Vista / Vista
®
XP / XP 64-bit Without RAID
®
XP / XP 64-bit OS on your SATA / SATAII / SATA3
Advanced screen
XP / XP 64-bit OS on your system.
TM TM
/ Vista
TM
64-bit / XP / XP 64-
TM TM
/ Vista 64-bit / XP
TM
64-bit / XP / XP 64-
SATA Confi guration.
29