Sabo 72-12H Betriebsanleitung Seite 56

COMMANDS AND CONTROL INSTRUMENTS
22. Speed change
lever
This lever engages drive
to the wheels and
changes the machine's
forward and reverse
speed.
The machine's forward
speed gradually increas-
es by moving the lever
towards «F». Reverse is
engaged by moving the
lever to «R». When the
brake pedal (21) is
pressed the lever auto-
matically returns to the
«N» (neutral) position.
It can also be moved
there manually even
without pressing the
brake.
IMPORTANT
When the parking brake (3) is engaged the speed change lever is locked in the «N»
position and cannot be moved until the parking brake and the pedal have been
released.
23. Lever to release the hydrostatic drive
This lever has two positions shown on the plate:
Position «A» = Drive engaged: for all operating conditions, when moving and dur-
Position «B» = Drive released: considerably reduces the effort required for moving
IMPORTANT
be carried out only when the engine has stopped with the lever (22) at position
«N».
ing cutting;
the machine manually, when the engine is not running.
To avoid damaging the transmission unit, this operation must
EN
21
22
N
R
23 A
B
15
F