Led Display; Supported Devices - Siemens SCALANCE WLC711 Bedienungsanleitung

3.3

LED display

Status displays
The L2 and L3 LEDs each flash at 1 second intervals.
If the L2 and L3 LEDs flash yellow together at an interval of 2 seconds, an upgrade or the
import of a configuration following an upgrade is being performed.
3.4

Supported devices

The following devices are supported by the SCALANCE WLC711:
● SCALANCE W78xC-2 RJ-45
● SCALANCE W78xC-2 M12
● SCALANCE W786-2HPW
● Enterasys AP3610
● Enterasys AP3620
● Other devices (non-Siemens) in 3rd-party mode
SCALANCE WLC711
Compact User Manual, 11/2012, A5E03740572-03
LED Meaning
PWR Power supply
L1 -
L2 Battery display
L3 RUN/STOP
For these devices, addresses authorizations and filter settings must be entered
individually. You will find more detailed information in the SCALANCE WLC711 User
Guide in the section "Working with Third-party APs".
LED Description
OFF Standby mode
GREEN Supply voltage is applied.
- -
flashing RED Battery low (remaining life less than 1 month).
Battery empty.
RED
Flashing System is starting up.
YELLOW
System running.
flashing GREEN
Description
3.3 LED display
43