Frequently Asked Questions (FAQs)
What do the blinking LEDs on the device mean?
Please read the chapter 'Description Of Status LED Codes' on page 10.
How can I change the IP address?
You can use the built-in web configuration tool as described on page 9.
The current IP address cannot be reached. What can I do?
You could perform a reset to factory default settings as described on page 10.
Does the device support RDM?
Yes. RDM is supported by MADRIX
STELLA (see page 9).
®
Is it possible to use more than one MADRIX
STELLA?
®
Yes. Art-Net or Streaming ACN is recommended for large projects by connecting
multiple devices to a switch (1 GBit/s) via suitable components to create a
network or use the built-in daisy-chain support (see page 9).
Where do I activate the ArtSync sync mode?
In the MADRIX
Software, it can be activated under 'Preferences...' à 'Device
®
Manager...' à tab 'Art-Net' à 'ArtSync'.
Where can I find the latest firmware update?
The latest MADRIX
Software also includes the latest firmware (see page 12).
®
Can I use other controllers apart from MADRIX
to control DMX fixtures ?
®
Yes. When using MADRIX
STELLA as a standard network node, you can use it in
®
combination with other compatible software, consoles, and controllers.
Do I need a MADRIX
STELLA and a MADRIX
KEY?
®
®
If you want to use the MADRIX
Software, yes. The MADRIX
Software license
®
®
is necessary and sold separately.
Can I repair MADRIX
STELLA myself?
®
No. Do not attempt any repairs. Any attempt will void your warranty (see p. 3)!
What can I do if my unit does not work anymore?
Please contact your dealer or supplier if the device seems to be defective.
13
EN