Ferax FKS-2000 Bedienungsanleitung Seite 7

ELECTRIC CHAIN SAW
Original instructions
Thank you for buying this Ferax product.
By doing so you now have an excellent product,
delivered by one of Europeís leading suppliers. All
products delivered to you by Ferax are manufactured
according to the highest standards of performance
and safety. As part of our philosophy we also provide
an excellent customer service, backed by our
comprehensive Warranty.
We hope you will enjoy using this product for many
years to come.
The numbers in the text refer to the diagrams on
pages 2-6.
Read the operating instructions carefully
before using this device. Familiarize yourself
with its functions and basic operation.
Service the device as per the instructions to
ensure that it always functions properly. The
operating instructions and the accompanying
documentation must be kept in the vicinity of
the device.
Introduction
This unit is designed for occasional homeowner use
and should not be used for commercial purposes or
subjected to heavy continuous use. Your new chain
saw can by used for a variety of projects such as
cutting firewood, making fence posts, felling small
trees, limbing, pruning at ground level, and light
carpentry. Cut only wood or wood products with your
saw.
Contents
1. Machine data
2. Safety rules
3. Assembly instructions
4. Operating instructions
5. Maintenance
1. Machine data
Specifications
Input
Power
No load speed
Cutting speed
Cutting length
Net weight
Oil capacity
Braking time
Vibration
Lpa (sound pressure)
Lwa (sound power)
Vibration level
The vibration emission level stated in this instruction
manual has been measured in accordance with a
standardised test given in EN 60745; it may be used
to compare one tool with another and as a preliminary
assessment of exposure to vibration when using the
tool for the applications mentioned
-
-
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping your
hands warm, and organizing your work patterns
General Information
Fig. 2
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. Lock / button
11. Front handle
12. Guide bar
13. Saw chain
14. Spiked bumper
15. Rear hand guard
16. Guide bar nose
17. Oil tank inspection window
18. Cord retainer
Safety features
Numbers preceding the descriptions correspond
with the numbers above to help you locate the safety
feature.
3
9
7
230 V, 50 Hz
2000 W
7600/min 10 Lock / off button
13.5 m/s (810 m/min)
405 mm
5.8 kg
200 ml
2. Safety rules
< 0.15 sec
3.69+1.5 m/s
2
Explanation of the symbols
84+3 dB (A)
104+3 dB (A)
using the tool for different applications, or with
different or poorly maintainted accessories, may
significantly increase the exposure level
the times when the tool is switched off or when it is
running but not actually doing the job, may signifi
cantly reduce the exposure level
Rear handle
Oil tank cap
Trigger start
Sprocket cover
Chain cover control knob
Chain tension ring
Electric motor
Electric cord
Chain brake lever/hand guard
Trigger start / stop switch
Stops saw motor when released.
Chain brake lever / hand guard
Activates the chain brake and protects the
operator's left hand in the event it slips off the front
handle while saw is running.
Electric motor
Is double insulated for added safety.
Prevents accidental acceleration of the saw motor.
The trigger cannot be squeezed unless lock/off
button is pushed forward to end.
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-obser-
vance of the instructions in this manual.
Indicates electrical shock hazard.
GB
7