Iget BLACKVIEW Benutzerhandbuch Seite 32

EN
Installing the SIM/micro card and battery
Switch your phone off before installing the card
and the battery.
Remove the back cover.
Set up the SIM card as shown on the phone
and slide it slightly into the slots of the SIM
cards.
Insert the memory card into the slot as shown
on your device.
Insert the battery with the contacts facing
the contacts on the phone. Slide gently the
battery in until it locks.
Replace carefully the back cover of the phone,
until you hear, it snaps.
Charging the battery
Before putting your phone into service you
must recharge its battery.
Connect the adapter into the charger. Make
sure that the adapter is inserted in the correct
position. Do not use the force when
connecting a plug.
Connect the charger to the wall outlet.
If the battery is fully charged, disconnect the
phone from the charger.
32