Safety Instructions - HBM P15 Montageanleitung

4
P15

Safety instructions

Use in accordance with the regulations
The P15 pressure gauge transducer is to be used only for the purpose of
pressure measurement and directly related control tasks. Use for any other
purpose is deemed not to be in accordance with the regulations.
To ensure safe operation, the pressure gauge transducer should only be used
as specified in the user manual. In addition, the appropriate legal and safety
regulations for each application must be observed during use. This applies
with equal force to the use of accessories.
The pressure gauge transducer is not a safety device as understood within
the context of use in accordance with the regulations. Operating this pressure
gauge transducer in perfect safety assumes an appropriate method of trans-
port, as well as technically correct storage, installation and assembly, combi-
ned with careful operation and maintenance.
Overall dangers from failing to comply with the safety instructions
The P15 pressure gauge transducer corresponds to the state of the art and is
safe to operate. There can be remaining dangers from the pressure gauge
transducer if it is used and operated inappropriately by untrained personnel.
Everyone entrusted with the installation, commissioning, maintenance or re-
pair of the pressure gauge transducer must have read and understood the
user manual and in particular the technical safety instructions.
HBM A0256-4.1 en/de/fr