List Of Components Supplied; Application; Mechanical Assembly - HBM P15 Montageanleitung

P15
1

List of components supplied

The list of components supplied for the standard version includes the follo-
wing:
1 Pressure gauge transducer
1 User manual P15
2

Application

Gauge pressure transducers are suitable for measuring static and dynamic
pressures of liquids and gases.
3

Mechanical assembly

Before assembling or dismantling the P15, check that there is no pres-
sure in the line.
The transducer is screwed into a prepared connection piece on the SW27
hexagon above the threaded connector.
The P15RVA1 is dust−proof and hose−proof, so that it complies with protec-
tion type IP65 in accordance with IEC 529.
Threaded
connector
Fig.1: Assembling the pressure gauge transducer
NOTE
In order to prevent an air−bulge during dynamic measurements, assem-
ble the pressure gauge transducer upside down.
A0256-4.1 en/de/fr
SW27 hexagon
7
HBM