HBM P15 Montageanleitung Seite 5

P15
Remaining dangers
The list of features and components provided by the pressure gauge transdu-
cer tells only part of the measurement technology story. Equipment planners,
installers and operators also have to plan, carry out and respond to the safety
engineering considerations of measurement technology in such a way that re-
sidual risks are minimised. Appropriate current regulations have to be obser-
ved. Notice must be given of residual dangers connected with measurement
technology.
This manual draws attention to residual dangers with the following symbols:
Symbol:
Meaning:
Warns of an imminently dangerous situation in which failure to comply with
safety requirements will result in death or serious physical injury.
Symbol:
Meaning:
Warns of a potentially dangerous situation in which failure to comply with
safety requirements can result in death or serious physical injury.
Symbol:
Meaning:
Warns of a potentially dangerous situation in which failure to comply with
safety requirements could result in damage to property or some form of
physical injury.
Symbol:
Means that important information about the product or its handling is being
given.
Symbol:
Meaning: CE mark
The CE mark is the manufacturer's guarantee that his product meets the
requirements of the relevant EC directives (the declaration of conformity is
available at http://www.hbm.com/HBMdoc).
A0256-4.1 en/de/fr
DANGER
Maximum danger level
WARNING
Dangerous situation
CAUTION
Potentially dangerous situation
NOTE
5
HBM