Filling The Steam Unit - Märklin 36433 Bedienungsanleitung

Note:
The digital protocol with the most possibilities is the highest
order digital protocol. The sequence of digital protocols in
descending order is:
Priority 1: mfx
Priority 2: DCC
Priority 3: MM
If two or more digital protocols are recognized in the track,
the decoder automatically takes on the highest value digital
protocol.For example, if mfx & MM are recognized, the mfx
digital protocol is taken on by the decoder. Individual proto-
cols can be deactivated with Parameter CV 50.

4. Filling the Steam Unit

Fill twice (2)
Filling with a pipette provides about 3 milliliters / 0.10 fluid
ounces.
10
E320931
Tank holds about 7 milliliters / 0.24 fluid ounces – do not
overfill!
If water accidentally overflows when filling the water tank
or if larger amounts of water land on the locomotive during
operation, this should be removed with a cloth.