Candy CTP634SC Gebrauchsanleitung Seite 14

WIFI function( ONLY FOR CTP644SCWIFI)
First of all, you should download Simply-Fy and install to your portable device. Then enroll your induction
hob.
Refer to annex for details.
To use the WIFI function, switch the hob on and press the WIFI key. The wifi LED flash
fast for 5 seconds which means the WIFI module is booting. If the WIFI module connects
the router, the wifi LED will remain on all the time. Otherwise, the WIFI LED will be
flashing in cycles of 1 second on 1second off. If connect correctly, you can find many hob
information from Simply-Fy, e.g. Zone power, remaining heat time.
oost mode
Activate the boost function
Touching the heating zone selection control
Cancel the Boost mode
Touching the heating zone selection control
that you wish to cancel the boost function
• The function can work in any cooking zone.
• The cooking zone returns to its original setting after 5 minutes.
• If the original heat setting equals 0, it will return to 9 after 5 minutes.
Note: It is recommended that the cooker hood suction is switched on few minutes prior to
cooking and switched off few minutes after terminating cooking.
Pause Mode
• You can pause the heating instead of shutting the hob off.
• When entering the Pause mode, all the controls except the ON/OFF control are disabled.
Touch the lock/pause control.
When the hob is in the pause mode, all the controls are disable except the ON/OFF
the induction hob off with the ON/OFF
Touching the slider to "b". Make sure the display shows
"b".
Select a heat setting by touching the slider control.
To enter pause mode
All the indicator will show " 11"
To unlock the controls
Touch the lock/pause control.
control in an emergency.
14
pow er up
pow er dow n
,
you can always turn