Getting Started - T4W TW-7 Bedienungsanleitung

TW-7/TW-7s
Set includes:
• Meter TW-7;
• resetting plate;
• case;
• battery;
• manual.
• zeroing plate;

2. Getting started

Coating thickness gauge TW-7 is designed to measure the thickness of a steel,
galvanized steel or aluminum sheet paint coating. It also helps to verify the
authenticity of e.g. car documents or banknotes thank to built-in UV tester.
The measurement resolution equals 1 or 10µm (selected in menu). The device
features an EEPROM memory for 200 measurements. The measurement's
results are stored also when the gauge is off which enables to look through
them after the measurements are done. They can be deleted from the main
menu level. The
screen even after the sensor is taken away from the specimen. The device has
a LCD back light which makes measuring in places with insufficient light (e.g.
garage) much easier.
Thank to improved technical solutions, the gauge's power consumption is very
slight. It takes only 1 AA (R6) alkaline battery for dozen or more continuous
working hours.
The device is equipped with a modern and fast microprocessor. The thickness
measurements are made using third level approximation algorithms combined
OPERATION MANUAL
function enables to keep the measurement result on
Hold
TW-7
www.t4w.eu
5