auna DigiPlug DAB Handbuch Seite 20

DAB FUNCTIONS
Press the MODE button repeatedly to switch to DAB mode.
On first use it will automatically scan all stations and save them.
Note: Fully extend the antenna.
Scan
• To auto scan, press the SCAN button and then release.
• This will start scanning up the frequency band and store all stations
that have a good signal.
• If can't scan any station, press and hold the MANU button to select
FULL SCAN, then press ENTER button to start scanning.
• The radio will automatically save all the stations with a strong sig-
nal, up to 240 MHz. After searching has finished it will automatically
play the first station stored.
• To listen to all stations that have been stored use the Prev and Next
button to scroll through them. Press the ENTER button when on the
required station.
• The radio will display station information when you press the INFO/
MENU button. Press multiple times to view all information available.
• When you turn on the radio again after it switching off, it will
automatically tune to the same station (DAB or FM) that was last
selected.
Note: In DAB mode, the radio will synchronize with the time and date
of the station.
20