Changing The Atomizer Head - Steamax Reuleaux Rx Gen3 Dual Bedienungsanleitung

STEAMAX GNOME KING – USING THE DEVICE

Changing the Atomizer Head

1. Remove the clearomizer from the battery / box mod of your e-cigarette.
2. Screw the head base from the glass tank, while the mouthpiece points to the ground.
3. Remove the old atomizer head and insert a new one. Please first drip a few drops of e-liquid directly into the wick of
the coil to make it fully saturated before first use.
4. Connect all parts again and make sure that no e-liquid can leak.
5. Screw the clearomizer back to the battery / box mod.
Please note the following:
Prior to first use, drip a few drops of your e-liquid on the atomizer head and let it sit in the liquid-filled tank for around
15 minutes after installation before you start vaping. Do not clean the atomizer head with water. If necessary, simply wipe
with a dry cloth Because atomizer coils are wearing parts, they must be changed regularly.
85
www.steamax.com