STEAMAX REULEAUX RX GEN3 DUAL Bedienungsanleitung Seite 83

STEAMAX REULEAUX RX GEN3 DUAL – USING THE DEVICE
Rotate the Display
Press and hold both adjustment buttons simultaneously for two seconds while the power is off. The display will then
rotate 180 degrees. This function allows you to view your settings from two different perspectives.
Install custom Logo
When the device is powered on, press the power button and the right adjustment button simultaneously, then press
the right button repeatedly until you reach the menu item Logo mode. Press the left adjustment button to switch
between Logo "ON" or Logo "OFF". Confirm your setting by pressing the power button. You can download our logo.
You can also choose your own logo and import it through software. The logo should be a monochrome image in bmp
format with limited 64 x 48 pixels.
Adjust the Preheat Function
When the device is powered on, press the power button and the right adjustment button simultaneously for two
seconds to enter the PREHEAT menu. Press the power button to switch between preheat wattage and preheat time.
Press the right or the left adjustment button to increase or decrease the parameter. Confirm your setting by pressing
the power button.
81
www.steamax.com