BINZEL-ABICOR ABIROB W300 Betriebsanleitung Seite 36

6 Putting into operation
6.5 Connecting the coolant
1 Control lead
2 Coolant flow hose
Fig. 7 Connecting the coolant
EN - 14
WARNING
Risk of burns
®
The ABIROB W cable assembly will become overheated if the coolant
level is too low.
• Wear protective gloves.
• Check the coolant level at regular intervals.
NOTICE
• Make sure that the coolant supply and return have been installed
properly. Coolant supply = blue, coolant return = red.
• Do not use any deionized or demineralized water as coolant or for
tightness or flow tests.
This may impair the service life of your welding torch.
• We recommend the use of ABICOR BINZEL series BTC coolant for
liquid-cooled welding torches.
1
5
3 Compressed air hose
4 Coolant return hose
4
5
ABIROB
2
3
®
ABIROB W cable assembly
®
W