Technical Data; Cutting Equipment - Husqvarna K970 II series Bedienungsanweisung

Technical data

Technical data
Engine
Cylinder displacement, cm
Cylinder bore, mm/inch
Stroke, mm/inch
Idle speed, rpm
Wide open throttle - no load, rpm
Power, kW/hp @ rpm
Ignition system
Manufacturer of ignition system
Type of ignition system
Spark plug
Electrode gap, mm/inch
Fuel and lubrication system
Manufacturer of carburettor
Carburettor type
Fuel tank capacity, liters/US fl.Oz
Water cooling
Recommended water pressure, bar/PSI
Weight
Power cutter without fuel and cutting blade, kg/Ib
Noise emissions (see note 1)
Sound power level, measured dB (A)
Sound power level, guaranteed L
Sound levels (see note 2)
Equivalent sound pressure level at the operator's ear, dB(A)
Equivalent vibration levels, a
2
Front handle, m/s
2
Rear handle, m/s
Note 1: Noise emissions in the environment measured as sound power (L
EC. The difference between guaranteed and measured sound power is that the guaranteed sound power also includes
dispersion in the measurement result and the variations between different machines of the same model according to
Directive 2000/14/EC.
Note 2: Equivalent sound pressure level, according to EN ISO 19432, is calculated as the time-weighted energy total for
different sound pressure levels under various working conditions. Reported data for equivalent sound pressure level for
the machine has a typical statistical dispersion (standard deviation) of 1 dB (A).
Note 3: Equivalent vibration level, according to EN ISO 19432, is calculated as the time-weighted energy total for
vibration levels under various working conditions. Reported data for equivalent vibration level has a typical statistical
dispersion (standard deviation) of 1 m/s

Cutting equipment

Max cutting depth,
Cutting blade
mm/inch
14" (350 mm) 125/5
16" (400 mm) 145/6
TECHNICAL DATA
3
/cu.in
dB (A)
WA
(see note 3)
hveq
2
.
Max. peripheral speed,
m/s / ft/min
90/18000
100/19600
K970 II, K970 II Rescue
93,6/5,7
56/2,2
38/1,5
2700
9300 (+/- 150)
4,8/6,5 @ 9000
SEM
CD
Champion RCJ 6Y/NGK BPMR 7A
0,5/0,02
Walbro
RWJ-7
1/33,8
0,5-10/7-150
14" (350 mm)
10,9/24,0
114
115
104
3,9
4,2
) in conformity with EC directive 2000/14/
WA
Max. speed of output
shaft, rpm
4700
4700
16" (400 mm)
11,9/26,2
114
115
104
3,4
4,8
Max blade thickness,
mm/inch
5/0,2
5/0,2
English – 121