Inateck BS01001 Bedienungsanleitung Seite 8

Note: When there's a partial data loss during transmission to iPad or iPhone, please
adapt the transmission speed to Ultra-Low Speed.
6. Inventory Mode
If you want to keep the barcodes in the buffer of Inateck BS01001 for multiple
uploading, you can choose inventory mode. In inventory mode, Inateck BS01001 will
count the number of the barcodes automatically. Users may use inventory mode
to keep scanned barcodes in the buffer of Inateck BS01001, and upload them to
computer in batches. Under inventory mode, users are not restricted to the time
and location when upload data. Of course, history data can be cleared in buffer after
uploading. More details about inventory mode are as below.
1) Scan the 'Enter Inventory Mode' barcode to enter Inventory Mode
2) Scan the 'Data Upload (for Inventory Mode only)'barcode to upload data from
buffer (for Inventory Mode only)
3) Scan the barcode to upload the number of scanned barcodes (for Inventory Mode
only)
4) Scan the barcode to clear data in buffer (for Inventory Mode only).
6
Enter Inventory Mode
Data Upload (for Inventory Mode only)
Upload the Number of scanned barcodes (for Inventory Mode only)
Clear Data in Buffer (for Inventory Mode only)