Inateck BS01001 Bedienungsanleitung Seite 4

Indicator Light 1 on the Base
The Use of the Double-sided Sticker
If you want to fix the base to the surface of a platform, the double-sided sticker can
be applied. If the sticker is no longer sticky due to dust, wash it in the water and then
dry it. Afterwards, the sticker can be reused.
How to Power Off
Long press the scan button if you want to power off the scanner immediately.
How to Use
Note: When the scanner is connected both via cable and wirelessly, it transmits data
through cable by default
Wired Mode:
1. Connect the barcode scanner with computer via USB cable
2. Open a file on computer and move cursor to the blank where scanning output
should be placed. Scanning results can be displayed on computer then.
Wireless Bluetooth Mode(HID)
1. Scan "Bluetooth Mode (HID)" barcode, and then "Match" barcode to notice the
indicator flashes blue and green alternately. The scanner enters Bluetooth pairing
mode.
Bluetooth Mode(HID)
2
Indicator Light 2 on the Base
Match