Bell SX840 Bedienungsanleitung Seite 13

E MASTER INPUTS / MASTER OUTPUTS E MASTER INPUTS / MASTER OUTPUTS E MASTER INPUTS / MASTER OUTPUTS
E MASTER INPUTS / MASTER OUTPUTS E MASTER INPUTS / MASTER OUTPUTS
MASTER OUT L/R MASTER OUT L/R MASTER OUT L/R
MASTER OUT L/R MASTER OUT L/R
Main Line Outputs via master controls L-Master and R-Master.
Serve to connect external power amplifiers (BELL PSX Series,
CS Series etc.).
MON OUT MON OUT
MON OUT MON OUT MON OUT
Monitor output via MONITOR OUT Control. Serve to connect
external power amplifiers (BELL PSX Series, CS Series etc.).
EFFECT RETURN L (Mono) / R EFFECT RETURN L (Mono) / R EFFECT RETURN L (Mono) / R
EFFECT RETURN L (Mono) / R EFFECT RETURN L (Mono) / R
Connect Mono- or Stereo outputs of external effect units via
separate (mono) jack sockets.
LEFT CHANNEL GRAPHIC EQUALIZER
125Hz 250Hz 500Hz 1kHz 2kHz 4kHz
RIGHT CHANNEL GRAPHIC EQUALIZER
125Hz 250Hz 500Hz 1kHz 2kHz 4kHz
The normal EQ setting with good speaker systems should be
around +-3dB max.
The built-in multieffect unit The built-in multieffect unit The built-in multieffect unit
The built-in multieffect unit The built-in multieffect unit
The integrated multieffect unit is prohrammed with 256
effects, such as reverb, stereo delay and many
others.
The send function is determined by the EFX
16 BIT DIGITAL
MULTI EFFECT
controls in the input channels. In case of any
PEAK
overload condition, the red PEAK LED will
MODE
9
10
8
illuminate. In this case, the input signal of the
11
7
12
6
13
5
14 multieffect unit must be lowered by turning the
4
15
3
16
2
1
EFFECT SEND control slightly counterclockwise.
9
10
8
11
7
12
6
13
5
14
Selecting a program group Selecting a program group
4 Selecting a program group Selecting a program group Selecting a program group
15
3
16
2
1
The program groups are selected via the rotary
TIME
ON 'MODE' switch in the digital multieffect section.
OFF EFFECT
'Time' selects the individual effect programs
from these groups.
GRAPHIC EQUALIZER GRAPHIC EQUALIZER
GRAPHIC EQUALIZER GRAPHIC EQUALIZER GRAPHIC EQUALIZER (LEFT/RIGHT)
AMP-L
PROTECT
Your SX840 features two 7- band
+6
Graphic Equalizers which are
+2
0
-4 positioned in front of the main left-
-6
8kHz
and right mixer outputs.
AMP-L
These equalizers should be used
PROTECT
for fine control of the overall sound
+6
+2
only.
0
-4
-6
8kHz
Avoid extreme settings of the EQ-
faders (like V shape).
13