Melitta BARISTA T Smart Bedienungsanleitung Seite 60

46
47
1
48
Fig. 25: Screwing/unscrewing the water
filter
The water filter (47) is screwed into and
unscrewed from the thread (46) on the
base of the water tank (48) using the
screwing aid at the end of the enclosed
coffee spoon (1).
Inserting the water filter
Information
Place the water filter into a vessel filled
with fresh tap water for a few minutes
before inserting it.
Requirement: The appliance is ready for
operation.
1. Press the "menu/ok" button for 2 sec-
onds.
» The menu appears on the display.
2. Navigate to the Care > Filter > Insert
filter menu.
3. Use the arrow buttons to select Start
and confirm with "menu/ok".
4. Follow the further instructions on the
display.
» The water hardness is automatically
adjusted on the water filter by the
appliance.
» The appliance is ready for operation.
Care and maintenance
Changing the water filter
Change the water filter when the appli-
ance requests you to do so.
Requirement: The appliance is ready for
operation.
1. Press the "menu/ok" button for 2 sec-
onds.
» The menu appears on the display.
2. Navigate to the Care > Filter > Change
filter menu.
3. Use the arrow buttons to select Start
and confirm with "menu/ok".
4. Follow the further instructions on the
display.
» The appliance is ready for operation.
Removing the water filter
The water filter should not be left standing
dry for a long period of time. When it is
not used for a long time, we recommend
storing the water filter in a vessel filled
with tap water in the refrigerator.
Requirement: The appliance is ready for
operation.
1. Press the "menu/ok" button for 2 sec-
onds.
» The menu appears on the display.
2. Navigate to the Care > Filter > Remove
filter menu.
3. Use the arrow buttons to select Start
and confirm with "menu/ok".
4. Follow the further instructions on the
display.
» The water hardness is automatically
reset to the previous setting.
» The appliance is ready for operation.
61