Map Settings - Porsche Classic Handbuch

The recommended route between
two locations can vary. If appropri-
ate data is available, traffic infor-
mation can be taken into account
in the route calculation.
Here you can adjust the application
sounds and change the language
for the audio instructions. In addi-
tion, you can activate and config-
ure various warning messages.
Here you can set how the software
should help you with various route-
related information in the map
display during navigation.
You can customise the application
to your language and to the meas-
urement units and time and date
formats used in your country. You
can also set your current time and
select your timezone here.
You can also delete all saved data
here and reset all factory settings
to their defaults.
This function provides information
about the current software state.

Display and settings
Map settings
You can tailor the appearance of the map
display to your own purposes. Customise the
map representation to your needs, select suit-
able colour designs for day and night from the
list, show or hide 3D buildings and manage your
display settings for Place symbols (which Places
should be shown on the map).
The map will always be shown on this page so
you can see the effect of a changed setting
immediately.
You have a choice between a 3D
view of the map from various an-
gles, a 2D view in the direction of
movement and a 2D view oriented
north. In 2D mode with northern
orientation, the map will always be
turned so north is on top.
Here you can tailor the basic scale
and angle to your requirements.
Three settings are available.
If this option is selected the map
will zoom out to offer you an over-
view of the surrounding area, if the
next event on your route (driving
manoeuvre) is somewhat distant.
When you approach the event, the
map display returns to normal.
You can switch between the colour
designs for day and night or let the
software do it automatically for
you, which happens a few minutes
before dawn and a few minutes
after sunset.
You can activate or deactivate the
saving of track logs. A track log is
the sequence of locations you pass
through on your journey.
You can choose which Places
should be shown on the map during
the navigation. Too many Places
make the map unclear; therefore
you should show as few as pos-
sible. Here you can define various
settings for the Place display. The
following options are available to
you:
T ouch the checkbox to show

or hide the Place category
concerned.
T ouch the name of a Place

category to open the list of all
subcategories.