Settings For Visual Instructions; Regional Settings - Porsche Classic Handbuch

The maps may contain information
about the maximum speed permit-
ted on the particular road sections.
Porsche Classic Radio Navigation
can warn you if you exceed the cur-
rent speed limit. This information
may be unavailable for your region
(please ask your dealer) or may not
always be correct for all roads on
the map. You can configure here
whether you want to receive visual
and/or acoustic warning messages
or not. You can use the slider to
set the relative excess speed
above which the application trig-
gers a warning. The following types
of warning messages are available:
A coustic warning:

If you exceed the speed limit
by the indicated percentage
rate, a spoken warning will be
given.
D isplay warning:

The current speed limit will be
shown on the map when the
speed is exceeded.
The real speed limits are always decisive,
not the information in the navigation system.
The maps may contain warning
information for the driver that is
shown in the form of traffic signs
on the screen. Touch this button
to switch on or off the warning for
these road sections (e.g. dangers,
sharp curves). For every category
of warning sign, you can define the
type of warning (sound or display)
and the distance from the danger
point at which the warning should
be triggered.
Settings for visual instructions
Here you can set how the software should help
you with various route-related information in the
map display during navigation.
The data fields in the corner of
the map display can be configured
individually. Touch this button and
select the desired values. You can
show information about your final
destination or the next interim
destination on the route.
If appropriate data is available,
lane information will be shown at
the top of the map, which looks
similar to real traffic signs on the
road. You can optionally switch this
function on or off.
When you are approaching a mo-
torway exit or a complicated junc-
tion and appropriate information is
available, the map will be replaced
by a 3D view of the junction. You
can choose whether to activate
this function or whether you want
to see the map throughout the
entire navigation.
When you drive into a tunnel, the
roads and buildings above you in
the open air can be distracting.
This function shows the image of a
tunnel instead of the map. A view
of the tunnel from above and the
remaining stretch of road in the
tunnel will also be shown.
Regional settings
You can customise the application to your
language and to the measurement units and
time and date formats used in your country. You
can also set your current time and select your
timezone here.
This button shows the language the
program is currently using for the
user interface. Touch it to select
another language from the list of
available languages. When you
change this setting the applica-
tion will be restarted. You need to
confirm this first.
Here you can define the measure-
ment units used by the application
for distances. With many lan-
guages it may be that the Porsche
Classic Radio Navigation speech
instructions do not support all units
listed. You can switch between the
12-hour and 24-hour time format
and various international formats
for the date display. You can also
select other country-specific units
for displaying various values in the
application.
Display and settings