miniland baby humiplus Bedienungsanleitung Seite 8

How to set the Spray Level
Gently press "Hum/ Spray -" button on the control panel or wireless remote control first, it will enter
the Spray level setting control. Pressing "Hum/ Spray +", user can increase the spray level.
The spray level is from 1 to 9 maximum. While pressing "Hum/Spray -" button, on the control panel
or wireless remote control, you can decrease the spray level. All spray level signal is displayed on
the screen. Continuously press the button over one second, you can continuously increase or
decrease spray level. If you don't press the button over 4 seconds, the actual RH% will be shown
on the screen panel again.
How to set the Timer
This humidifier has 9 timer setting, from 1 hour up to 9 hours. To use this feature, simply press the
"Timer" button on the control panel or "wireless remote control".
Press once: 1 hour
Press twice: 2 hours
......
Press 9 times: 9 hours
The timer setting signal is displayed on the screen. After setting 9 hours, press the timer button,
it will turn off the timer setting function.
How to operate the Warm Mist feature
Gently press the Warm Mist button on the control panel or wireless remote control, moisture
temperature will be gradually increased and will become a warm mist. Warm mist signal is
displayed on the screen. Press the warm mist button a second time to turn this function off.
How to operate the Ionizer function
For the Ionizer function, it can be independently operated. When they plug in the product, users can
operate the Ionizer function separately even though the humidify function is not used. If they simply
press the Ionizer button on the control panel or wireless remote control, the Ionizer function will be
operated. Ionizer signal is displayed on the screen. Press the Ionizer button a second time to turn this
function off.
Water Empty signal
When water tank is empty, there will be water empty sign shown on the screen. The humidifier will be
off automatically. Users need to refill water when red empty signal is shown.
Attention:
1 To avoid electric shock, do not touch the mains when your hands are wet.
2 You must not put any object to obstruct the mist outlet/nozzle
3 If the power cord or the product is damaged, please do not use the product immediately.
It must be replaced by the manufacturer or its service agent or a similarly qualified person in order
to avoid a hazard.