Program And Operation; Dome Camera Selection; Accessing The On-Screen Menu Utility; How To Control The On-Screen Menu Utility - Eneo IPP-82A0030MIA Schnellstartanleitung

Program and Operation

Dome Camera Selection

Before you program or operate a dome camera, you must select the dome camera by
pressing No. + CAM keys.
Example: Pressing 1 , 0 + CAM keys sequentially will select dome camera 10. The selected
dome camera ID will be displayed on the LCD monitor of the keyboard controller.

Accessing the On-Screen Menu Utility

You can call up the On-screen menu utility on your monitor by pressing the MENU key on
the keyboard controller, the following On-screen menu utility will appear:

How to control the On-Screen Menu Utility

Function
Call the On-screen menu utility.
Navigate through the menu items.
Go into the sub-menu items.
Change value.
Enter the editing title mode.
Change value of angle.
Enter the changing angle mode.
Exit the changing angle mode.
Escape (EXIT)
14
Button
MENU
Joystick up or down
Joystick left or right or IRIS Open
Joystick left or right or
Zoom handle twist or Tele , Wide
CTRL + Joystick
IRIS Open
IRIS Close
ESC