RIKA COMO Montageanleitung Seite 6

Stove settings
Set your desired heat output on the control panel.
Thermostat settings
Programme your desired switch-on/switch-off times and the desired
temperature in accordance with the manufacturer's instructions.
Function
Your pellet stove will continue to heat with the set heat output until
the desired room temperature or the programmed switching time is
reached. Upon reaching the desired temperature or switching time
the pellet stove switches off and "Standby" appears in the display. If
the room temperature falls below the set value or a new heating
time starts, the stove will switch back on again automatically.
Important: If the stove is shut down manually (e.g. before reaching
the room temperature), "heat off" will appear in the display (refer to
the stove operating manual for more information). The stove is
thereby deactivated and the room thermostat function is inactive!
The heating procedure can only be resumed by pressing the
ON/OFF button.
Note: Automatic operation with the room thermostat particularly
requires consistent adherence to the cleaning intervals specified in
the operating manual.
Further information regarding commissioning can be inferred from
the manufacturer's operating manual.
Seite 6 von 12