IDEXX SNAP Pro Kurzanleitung Seite 5

4
If you are planning to connect the analyzer wirelessly to an IDEXX VetLab* Station, proceed to step 5.
Note: IDEXX VetLab* wireless router required.
OR
If you are connecting the analyzer to an IDEXX VetLab Station using an IDEXX VetLab* wired router,
connect the analyzer to a numbered port on the router using a CAT5 cable (provided).
5
Press the gray Power
the startup screen, follow the on-screen instructions.
6
When prompted, do the following:
a. Select your location and then tap the
Next icon.
b. If you are connecting the analyzer to an
IDEXX VetLab Station, tap Yes, select the
IDEXX network from the list, and then tap the
Next icon. If the IDEXX network is not listed,
tap the Refresh
OR
If you are not connecting the analyzer to an
IDEXX VetLab Station, tap No and then tap
the Next icon. When prompted, confirm that
you are not connecting the analyzer to an IDEXX
VetLab Station.
c. Select the desired date format, enter today's
date using the numeric keypad, and then tap
the Next icon.
button at the top of the back of the SNAP Pro Analyzer to power it on. After
icon.
d. Select the desired time format, enter the current
time using the numeric keypad, and then tap the
Next icon.
e. If you want the analyzer to beep when there is
an error, warning, or other information displayed,
select the Sound icon, select the check boxes
next to the desired options, and then select if you
would like the sound to be Soft or Loud. Then
tap the Check Mark
OR
If you do not want the analyzer to beep, select
the Mute icon and then tap the Check Mark
icon.
Note: Critical errors will always beep.
f. When prompted, tap OK to restart the analyzer.
Need help? Visit idexx.com/prohelp
for helpful installation videos and
support documentation.
icon.