IDEXX SNAP Pro Kurzanleitung Seite 11

Technical specifications and safety information
External USB power supply adapter
Input: 100–240 V AC, 47–63 Hz, 0.3 A
Output: 5 V DC, 1 A
Consumption
Operating: Maximum 5 W
Batteries
Main batteries
Part number: 79-91922-01
Output: 3.7 V DC, 2,600 mAh
Watch battery
Part number: BR1225
Output: 3 V DC, 48 mAh
Operating conditions
Operating temperature: 15°C–30°C (59°F–86°F)
Safety precautions
• The SNAP Pro* Analyzer contains no
user-serviceable components. Do not disassemble.
Call IDEXX Technical Support for any service issues.
• Do not insert anything in the port except SNAP* tests
approved for use with the SNAP Pro Analyzer.
• Protect the analyzer from sources of heat or flames.
• Use only the supplied power adapter.
• Use only IDEXX-supplied batteries.
• Dispose of used batteries only in accordance with
your local ordinances. These batteries contain
lithium. Recycling is required in the European Union
and is strongly encouraged in all other countries.
• If the equipment is used in a manner other than
specified, the protection provided by the analyzer
may be impaired.
• The SNAP Pro Analyzer should be placed on
a flat surface during operation.
Notice: To satisfy Industry Canada (IC) radio frequency
(RF) exposure requirements for mobile and base
station transmission analyzers, a separation distance
of 20 cm or more should be maintained between the
antenna of this analyzer and persons during operation.
To ensure compliance, operation at closer than this
distance is not recommended. The antenna(s) used for
this transmitter must not be colocated or operating in
conjunction with any other antenna or transmitter.