Use And Operation - Klarstein 10030844 Bedienungsanleitung

A Display
B Ice-cube obtaining button
C Water dispenser button
D ON/OFF Button: to turn on/off the unit
E SELECT Button: to select the size of the ice cube and
the number code of all kinds of delay time
F TIMER Button: to setting the timer-on or timer-off
program
Before first Use
• Remove the exterior and interior packaging, Then check all the accessories are included. If any parts are
missing, please contact our customer service.
• Remove all the tapes on the unit. Open the transparent window, take out the accessory parts inside.
• Clean the interior (such as water reservoir, Ice cube pushing spring etc.) with lukewarm water and a soft cloth.
• Locating your ice maker on a level counter table far from direct sunlight and other sources of heat (i.e.: stove,
furnace, radiator). Maker sure that there is at least 15 centimeters between the back and sides of your ice
maker with the wall.
• Allow one hour for the refrigerant fluid to settle down before plugging your ice maker in.
• The power plug must be accessible directly.
WARNING: fill with potable water only. Only use drinking water!
Operation
1. Open the left side door, pour potable water into reservoir. Keep water level below the "MAX" water level
mark.
11

Use and Operation